20 3.2 Cells of the Nervous System

Biological psychologists striving to understand the mind and behavior, study the nervous system in various ways. The nervous system is an electro-chemical communication system, which receives and processes information from the outside world, and allows us to react to it. The nervous system is composed of two basic cell types: neurons and glial cells. The neurons (nerve cells) are the central building blocks of the nervous system, whereas various types of glial cells provide support services.

Neuron Structure

Like all cells, neurons consist of several different parts, each serving a specialized function (Figure 3.4). The cell body or soma contains the nucleus (which contains the genetic material of the cell), and other structures that are important for cell maintenance. The soma is surrounded by a semipermeable membrane, which regulates what can pass in and out of the neuron. Information enters the neuron through the dendrites, which are branching tree-like projections on the soma. Information is then transmitted to the other end of the neuron down a tail-like process called the axon. Information travels through the neuron in the form of electrical energy. At the end of the axon, there are small structures called terminal buttons which contain chemical messengers called neurotransmitters; these allow the neuron to communicate with other cells.

 

Picture of a neuron - cell body has nucleus and nucleolus labels and tree-like dendrites, the axon is a tail like process coated in myelin sheath, the nodes of Ranvier -- the gaps between the myelin are labeled, the axon terminals at the end of the axon are are labeled
Figure 3.4. Structures within a neuron

The length of the axon determines how far one neuron carries information through our bodies, some axons are microscopic while others, like the ones running from our toes to the base of our spine, are several feet long. Many axons are coated with a fatty substance known as the myelin sheath, which acts as an insulator and speeds up the transmission of the electrical signals down the axon. The myelin has small gaps along the axon called the nodes of Ranvier. In myelinated axons, the electrical signals are only generated at the nodes, like a train making express stops. In unmyelinated neurons, information travels more slowly because electrical signals need to be generated along the entire length of the axon—acting more like a local train. Multiple sclerosis (MS) is an autoimmune disorder that causes degeneration of the myelin sheath on axons throughout the nervous system. This can result in inefficient transmission, and sometimes total loss, of neural information. Some of the first symptoms of MS include blurry vision, sensations of numbness (like pins and needles) and difficulty walking.

Link to Learning

Watch this video about neuronal communication to learn more.

Neuronal Communication

Now that we have learned about the basic structures of the neuron, let’s take a closer look at the signals that the neurons transmit. We will look first at how the electrical signals are generated and move through the neuron. Then we will look at how the chemical messengers are released and communicate with other cells, including other neurons.

The neuron exists in a fluid environment—it is surrounded by extracellular fluid and contains intracellular fluid. The neuronal membrane keeps these two salty fluids separate. Both fluids contain sodium (Na+) and potassium (K+) ions, and other charged molecules. Differences in the overall electrical charge of molecules in the two fluids contribute to a difference in voltage across the membrane, called the membrane potential. When the neuron is resting, the membrane resting potential is about 70 mV and the inside of the neuron is more negatively charged than the outside. In general, ions move quickly across concentration gradients from areas of high concentration to areas of low concentration through the process of osmosis. Na+ is at higher concentrations outside the neuron, so it strongly wants to move into the neuron. K+ on the other hand, is more concentrated inside the neuron, and so wants to move out of the neuron (Figure 3.5). Because the inside of the neuron is slightly negatively charged compared to the outside, this provides an additional drive for Na+ to be drawn into the neuron (opposite electrical charges attract). We call this an electrical gradient. However, there is relatively little ionic movement across the membrane when the neuron is resting. This is because most of the Na+ and K+ gates in the semi-permeable membrane, which regulate the flow of ions, are closed when the neuron is at rest. This results in a high state of tension across the membrane; the Na+ and K+ ions are waiting for the gates to open so they can move through them, and so the neuron is primed and ready for action. For the most part, the Na+ and K+ gates do a good job of staying closed, but a few open and there is a little bit of leakage of Na+ and K+ in the direction described above. To keep the resting potential stable, there is an active sodium-potassium pump, which pumps three sodium ions out of the neuron for every two potassium ions in.

 

Neuron on the left - close up of the cell membrance and the intra and extracellular fluid on the right. Lots of Na+ and Cl- ions on outside of cell and lots of anions and K+ ions inside the cell
Figure 3.5. At resting potential, Na+ (blue pentagons) is more highly concentrated outside the neuron in the extracellular fluid (shown in blue), whereas K+ (purple squares) is more highly concentrated near the membrane in the cytoplasm or intracellular fluid. Other molecules, such as chloride ions (yellow circles) and negatively charged proteins (brown squares), help contribute to a positive net charge in the extracellular fluid and a negative net charge in the intracellular fluid.

From this resting potential state, if the neuron receives a signal at the dendrites (Figure 3.5), the Na+ gates open on the neuronal membrane, and Na+ ions rush into the cell. These ions make the inside of the cell become more positively charged. If that charge reaches a certain level, called the threshold of excitation, the neuron becomes active and the action potential begins. The action potential, sometimes called a nerve impulse, is a large, rapid change in voltage across the membrane. (Figure 3.6).

Graph of action potential - membrane voltage in mV is plotted against time. The action potential begins at -70 mV the resting potential. It then shows a small increase to the threshold of excitation at -55 mV and then a steep positive increase. The peak of the action potential is at +30 mV - the dow.nward return to baseline is labeled repolarization. The voltage dips below the resting potential briefly (hyperpolarization) before returning to baseline
Figure 3.6. During the action potential, the electrical charge across the membrane changes dramatically.

Whether or not the threshold of excitation is reached depends on the strength of the signal being received. When the signal is strong, more Na+ gates open and more Na+ ions enter and the inside of the cell becomes more positive. When the threshold of excitation is reached, all the Na+ channels open rapidly, causing a massive influx of Na+ ions and a huge positive spike in the membrane potential. At the peak of the spike, the Na+ gates close and the K+ gates open. As positively charged potassium ions rapidly leave the neuron, the inside of the cell quickly starts to become less positive (or more negative). This process is called repolarization. After an action potential is generated there is a resting period, called the refractory period, where the inside of the cell is in a state of hyperpolarization. This means that it is slightly more negative than the resting potential for a few milliseconds; it is not possible to generate another action potential during the refractory period. As the K+ gates close, the neuron returns to the resting potential (Figure 3.6).

The action potentials are generated in the cell body first and then are produced along the axon until they reach its end. At each point in the journey, some of the sodium ions that enter the neuron diffuse to the next section of the axon, raising the charge past the threshold of excitation and triggering a new influx of sodium ions. So, multiple action potentials are generated sequentially all the way down the axon until they reach the terminal buttons.

The action potential is an all-or-none phenomenon. In simple terms, this means that an incoming signal from another neuron must be strong enough to reach the threshold of excitation, otherwise, there is no action potential (none). The action potential is always generated at its full strength at every point along the axon. It does not fade away as it travels down the axon. This ensures that there is no loss of information along the way. The size of the action potential does not depend on the strength of the stimulus, it is always the same. Strong stimuli simply produce more action potentials.

In many ways, the way that a neuron produces action potentials is similar to the way that an old fashioned toilet produces a flush. Both work on the all or none principle. A toilet also has a threshold of excitation – if you do not push the handle hard enough, it will not flush. However, as long as you press the handle hard enough, the toilet always produces a flush of the same size. So, you have all or none. If you push very hard, you don’t get any more water than if you push more gently, provided you meet the threshold of excitation. Like a neuron, a toilet also has a refractory period (when the tank is refilling); the toilet cannot flush during this time.

Communication across the synapse

At the end of every axon, there is a tiny gap called a synapse between the terminal buttons and the next cell, which is often another neuron. This gap is filled with extracellular fluid and is too big for an action potential to jump across. Instead, when the action potential arrives at the terminal button, small vesicles release their neurotransmitters into the synapse. The neurotransmitters travel across the synapse and bind to receptors on the dendrites of the adjacent neuron. This action then affects the ionic gates in that neuron. Some neurotransmitters are excitatory (they open Na+) gates, whereas others are inhibitory (they open K+) gates. So, neurotransmitters give more flexibility in terms of how neurons can respond to a stimulus.

Neurotransmitters and Drugs

There are several different types of neurotransmitters in our nervous system, each one acts on specific types of receptors and has a particular action (see Table 3.1).

Table 3.1 Major Neurotransmitters and How They Affect Behavior

Neurotransmitter Involved in Potential Effect on Behavior
Acetylcholine Muscle action, memory Increased arousal, enhanced cognition
Beta-endorphin Pain, pleasure Decreased anxiety, decreased tension
Dopamine Mood, sleep, learning Increased pleasure, suppressed appetite
Gamma-aminobutyric acid (GABA) Brain function, sleep Decreased anxiety, decreased tension
Glutamate Memory, learning Increased learning, enhanced memory
Norepinephrine Heart, intestines, alertness Increased arousal, suppressed appetite
Serotonin Mood, sleep Modulated mood, suppressed appetite

Much of what psychologists know about the functions of neurotransmitters comes from research on the effects of drugs in psychological disorders. There is some biological evidence that psychological disorders like depression and schizophrenia are associated with imbalances in one or more neurotransmitter systems. Psychoactive medications affect neurotransmitter balance and can help improve the symptoms associated with these disorders.

Psychoactive drugs generally act as agonists or antagonists for a given neurotransmitter system, which is why they can affect our behaviors, thoughts, and feelings. Agonists are chemicals that mimic the action of a neurotransmitter at the receptor site. An antagonist, on the other hand, blocks or impedes the normal activity of a neurotransmitter at the receptor. GABA-agonists such as benzodiazepines mimic the effects of GABA and so produce calming effects for people who have anxiety. Conversely, psychotic symptoms in schizophrenia are associated with high levels of dopamine and so are treated with dopamine antagonists. These drugs stop dopamine’s effects by blocking its receptors. Thus, they can prevent one dopamine-producing neuron from sending information to adjacent neurons.

In contrast to agonists and antagonists, which both operate by binding to receptor sites, some psychoactive drugs affect the deactivation of the neurotransmitter. Once the neurotransmitter has done its job it is typically removed in some way so that it does not continue to act on the post-synaptic neuron. In some cases, the neurotransmitters in the synapse diffuse away, or they are broken down by an enzyme or pumped back into the pre-synaptic neuron in a process known as reuptake (Figure 3.7).

Picture of neuron on left and close up of synapse on right. The presynaptic cell has vesicles of neurotransmitter with arrows indicating that they are traveling to the cell membrane - some are fused with the membrane and are releasing their contents into the synapse. Some of the neurotransmitters are binding with receptors on the post-synaptic cell. Some of the NT is being taken back up into the pre-synaptic cell (labeled Reuptake)
Figure 3.7. Reuptake involves moving a neurotransmitter from the synapse back into the axon terminal from which it was released.

Some psychoactive drugs can prevent the removal of the neurotransmitters. This allows neurotransmitters to remain active in the synapse for longer durations, increasing their effectiveness. Depression, which has been linked with reduced serotonin levels, is frequently treated with selective serotonin reuptake inhibitors (SSRIs). By preventing reuptake, SSRIs prolong the action of serotonin, giving it more time to interact with serotonin receptors on dendrites. So, SSRIs act as serotonin agonists, even though they do not work directly on the receptors. Common SSRIs include Prozac, Paxil, and Zoloft. Psychotropic drugs are not instant solutions for people suffering from psychological disorders. Often, an individual must take a drug for several weeks before seeing improvement, and many psychoactive drugs have significant negative side effects. Furthermore, individuals vary dramatically in how they respond to the drugs. To improve chances for success, it is common for people receiving medications to undergo psychological and/or behavioral therapies as well. Research suggests that combining drug therapy with other forms of therapy tends to be more effective than any one treatment alone for the treatment of depression (Cuijpers, Noma, et al., 2020) and some anxiety disorders like panic disorder and obsessive-compulsive disorder (Cuijpers, Sijbrandij, et al., 2020).

License

Icon for the Creative Commons Attribution 4.0 International License

Introduction to Psychology (A critical approach) Copyright © 2021 by Rose M. Spielman; Kathryn Dumper; William Jenkins; Arlene Lacombe; Marilyn Lovett; and Marion Perlmutter is licensed under a Creative Commons Attribution 4.0 International License, except where otherwise noted.

Share This Book